Pneumatic Conveyor Air Amplifier Pneumatic Feeder Material Conveyor Particle

Pneumatic Conveyor Air Amplifier Pneumatic Feeder Material Conveyor Particle. Pneumatic conveyor, air amplifier, vacuum generator, pneumatic feeder, powder feeder model: Double head 19mm-aluminum alloy Double head 25mm-aluminum alloy Double head 32mm-aluminum alloy Double head 38mm-aluminum alloy Double head 50mm-aluminum alloy Double head 63mm-aluminum alloy Double head 76mm-aluminum alloy Working principle of pneumatic conveyor: After the compressed air enters the annular high-pressure cavity (2) through the air inlet (1), the high-speed airflow flows through the nozzle (3).

This high-speed airflow creates a low pressure at the inlet (4) to form a vacuum, so the material at the inlet is sucked in by the high-pressure airflow And be transported to the designated location (5). Application of pneumatic conveyor: Pneumatic conveyors are widely used in pneumatic pipeline transportation of light materials in textile, chemical food, electronic plastics, medicine, packaging and other industries. For the packaging of pills, transfer to the assembly line, the loading of the plastic masterbatch on the injection molding machine, and the transfer of light and small solid materials such as waste suction and waste collection. Pneumatic conveyors can transfer plastic raw materials, debris, wood chips, food, solids, waste, textiles, particles and small parts quickly and at low cost. The suction side of the pneumatic conveyor can generate a very strong vacuum.

In addition to being used for solid material transportation, it is also suitable for small area smoke gas removal, local area dust removal and other applications, such as suction of welding fumes Wait. Multiple pneumatic conveyors are connected in series to transport materials farther and higher.

Matters needing attention when using pneumatic conveyor: Always use a dry air source. An air filter must be installed at the front of the air inlet of the pneumatic conveyor to ensure that the air is dry. In order to obtain the best performance of the pneumatic conveyor, it is necessary to accurately understand the pressure and volume of compressed air.

In the case of sufficient air volume, the pressure of compressed air should reach 0.55-0.65Mpa. In order to ensure the pressure and volume of compressed air, try not to use hose connection and shorten the distance of the pipeline. If it is far away from the air source, a 1-inch trachea connection should be used. Neither the inlet end of the pneumatic conveyor nor the hose of the outlet is recommended to be connected by a 90 ° elbow. Otherwise, the performance of the pneumatic conveyor will be reduced.

Our object is to satisfy all our customers. We take pictures and type the products descriptions all by ourself to ensure to present all real situations. What you see is what you get. We will reply you within 24 hours asap.